Revit StruXML Add-In 1.1.003 Release date: 2014-12-18 Fixed bugs: - Mapping error at export of cold formed steel sections is fixed. - Wall eccentricity export error in case of manually adjusted wall analytical model is fixed. - Error at exporting curved beams is fixed. New features: - Mapping list is now filtered to selected elements at export. - Search GUID feature is introduced. ________________________________________________________________________________________________________________ Revit StruXML Add-In 1.1.002 Release date: 2014-09-08 Fixed bugs: - Wall openings could not be created when imported to Revit at some very special cases. New features in 'Export StruXml': - Structural material of beams / columns / braces / isolated foundations can now be exported also as 'Type' parameter. - Multiple floor elements and foundations slabs drawn as one object in Revit are now divided into separate elements when exported to struxml. - Eccentricity of beams is now exported to struxml. - When a slanted column in Revit is exported to struxml, a warning in the 'Export report' will be thrown. - If a Revit model was initially iported from struxml and now is exported back to struxml, a warning message will be thrown if other (than initial) calculation code will be chosen at the export. New features in 'Import StruXml': - Saving mapping and loading mapping to/from struxml file is now possible. - Import of profiles plate panels as floor elements to Revit is now possible. - Extended "Import Report" is now available. - Multiple elements mapping is now possible. Recognized issues: - At some very special situations Revit throws a warning that an imported column could not be rotated (even if a column was not rotated in FEM-Design). - At some very special situations Revit stil can throws a warning that wall opening could not be created. - Import of FEM-Design models created in older versions than 13.01.003 to Revit is not always possible and may create 'Invalid file' warning or crash of Revit (especially in version 2014) ________________________________________________________________________________________________________________ Revit StruXML Add-In 1.1.001 Release date: 2014-06-25 New features: - Import struxml file to Revit. - Brace elements that are exported to FEM-Design are now recognized at Truss elements (not as beams as before) Recognized issues: - If wall foundation is added to a wall that contains a wall opening, after import of those elements to Revit, a wall foundation will also be added to the top edge of the opening. - If a point support group is defined in a local coordinate system of an element that is different than the global coordinate system of the FEM-Design model, and the stiffness of this point support group is not the same in all directions, an error will be thrown and this support will not be imported. - At some very special situations Revit cannot create an opening in an imported wall. ________________________________________________________________________________________________________________ Revit StruXML Add-In 1.0.004 Release date: 2013-12-18 Fixed bugs: - Error message appeared when trying to export a local file of a central model from Revit 2014. Recognized issues: - If one attempts to open two Revit models containing different data schemas in one Revit session, a warning message may appear. In that case, Revit restart is required to open such a file. ________________________________________________________________________________________________________________ Revit StruXML Add-In 1.0.003 Release date: 2013-12-13 Fixed bugs: - Floor, curved walls and isolated foundation elements were not exported correctly at some very specific cases. New features: - Export of loads and load cases. - Extended export report. - Publicity level of Add-In data has been changed. It means that the dialog warning about missing StruXML updater (when Revit model exported once to struxml was opened in Revit without add-in installed) will not appear any more for all new files exported using the add-in in version 1.00.003. ________________________________________________________________________________________________________________ Revit StruXML Add-In 1.0.002 Release date: 2013-10-07 Fixed bugs: - Export of boundary conditions under curved walls was not correct. - Error message appeared when analytical model of wall foundation was disabled. - Error message appeared when analytical alignment of a wall was projected to a reference plane or a grid. - User defined boundary conditions could not be exported from Revit 2014. - Horizontal size of the building was calculated based on physical model instead of analytical one. New features: - Option to export foundations as boundary conditions or foundation elements. - Option to export only selected elements. - Family names of elements are included in warning messages in the export report. - Revit StruXML Add-In Manual is reachable from the export dialog. - Update dialog will appear when a new release of Revit StruXML Add-In is available.